Plumber in Pune

Options

• Regular tap
• Swan-neck tap
• Hot & cold mixer
• Shower mixer

What’s included

• Inspection of the tap to find the fault
• Repair of leaks, drips or low flow
• Sourcing of spare parts from the local market, if needed
• Clean-up after the job

How it’s done

1. Inspection & quote. The plumber inspects the tap and shares a repair quote for your approval.
2. Repair. The tap is repaired, using spare parts from the local market if needed.
3. Testing. The water flow is checked to make sure there are no leaks.
4. Clean-up. The work area is cleaned after the job.

Please keep ready

• Access to the main water valve

If you choose not to go ahead after inspection, we'll let you know about any visit fee when you book.
Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

Options

• Tap filter
• Tap extender
• Water-saving nozzle
• Two-way tap connector

What’s included

• Inspection of the tap and its outlet
• Fitting of the selected accessory
• Check for leaks after fitting
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the tap outlet and the accessory to be fitted.
2. Fitting. The accessory is fitted securely on the tap.
3. Testing. The water flow is checked to make sure there are no leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• The accessory itself is not included.

Please keep ready

• The accessory to be fitted

If you choose not to go ahead after inspection, we'll let you know about any visit fee when you book.
The warranty does not cover spare parts supplied by the customer.

Options

• Regular tap
• Swan-neck tap
• Hot & cold mixer

What’s included

• Inspection of the tap point
• Removal of the old tap, if any
• Installation of the new tap
• Check for leaks after installation
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the tap point and the existing fittings.
2. Removal. The water supply is shut off and the old tap is removed, if any.
3. Installation. The new tap is fitted with proper sealing.
4. Testing & clean-up. The water flow is checked for leaks and the work area is cleaned.

Not covered

• The tap itself is not included.

Please keep ready

• Access to the main water valve
• The new tap

If you choose not to go ahead after inspection, we'll let you know about any visit fee when you book.
Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

Options

• Jet spray
• Bidet

What’s included

• Inspection of the jet spray or bidet
• Repair of the fault, or replacement if repair is not possible
• Check for leaks after the work
• Clean-up after the job

How it’s done

1. Inspection & quote. The plumber inspects the jet spray or bidet and shares a quote for your approval.
2. Repair. The fault is repaired, using spare parts from the local market if needed.
3. Replacement. If repair is not possible, the unit is replaced with a new one.
4. Testing & clean-up. The water flow is checked for leaks and the work area is cleaned.

Please keep ready

• Access to the main water valve

If you choose not to go ahead after inspection, we'll let you know about any visit fee when you book.
Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

What’s included

• Removal of the old seat cover, if any
• Fitting of the new seat cover
• Check that the cover is firm and aligned
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the toilet and the fixing holes for the seat cover.
2. Installation. The seat cover is fitted and tightened securely.
3. Final check. The cover is checked to make sure it opens, closes and sits evenly.
4. Clean-up. The work area is cleaned after the job.

Not covered

• The seat cover itself is not included.

Please keep ready

• The new seat cover

The warranty does not cover spare parts supplied by the customer.

Options

• External PVC tank
• External ceramic tank
• Concealed tank

What’s included

• Inspection of the flush tank to find the fault
• Repair of leaks or flushing problems
• Sourcing of spare parts from the local market, if needed
• Clean-up after the job

How it’s done

1. Inspection & quote. The plumber inspects the flush tank and shares a repair quote for your approval.
2. Repair. The fault is repaired, using spare parts from the local market if needed.
3. Testing. The tank is filled and flushed to check that it works without leaks.
4. Clean-up. The work area is cleaned after the job.

Please keep ready

• Access to the main water valve

If you choose not to go ahead after inspection, we'll let you know about any visit fee when you book.
Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

What’s included

• Removal of the old flush tank
• Installation of the new external flush tank
• Connection to the water supply and toilet
• Testing and clean-up after the job

How it’s done

1. Inspection. The plumber checks the existing tank, fixing points and connections.
2. Removal. The water supply is shut off and the old tank is removed.
3. Installation. The new tank is fixed and connected to the water supply and the toilet.
4. Testing & clean-up. The tank is flushed to check for leaks and the work area is cleaned.

Not covered

• The flush tank itself is not included.

Please keep ready

• Access to the main water valve
• The new flush tank

The warranty does not cover spare parts supplied by the customer.

Options

• Installation or replacement
• Repair
• Blockage removal

What’s included

• Inspection of the Indian toilet
• Installation, replacement, repair or blockage removal as selected
• Check for leaks and proper flushing
• Clean-up after the job

How it’s done

1. Inspection & quote. The plumber inspects the Indian toilet and shares a quote for your approval.
2. Service. The selected installation, repair or blockage removal is carried out.
3. Testing. The toilet is flushed to check for proper drainage and no leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• Granite work is not included.
• Major masonry work such as tiling or cementing is not included.

Please keep ready

• Access to the main water valve

If spare parts are needed, the plumber will source them from the local market.
Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

Options

• Installation or replacement
• Repair
• Blockage removal

What’s included

• Inspection of the wall-mounted western toilet
• Installation, replacement, repair or blockage removal as selected
• Check for leaks and proper flushing
• Clean-up after the job

How it’s done

1. Inspection & quote. The plumber inspects the wall-mounted western toilet and shares a quote for your approval.
2. Service. The selected installation, repair or blockage removal is carried out.
3. Testing. The toilet is flushed to check for proper drainage and no leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• Granite work is not included.
• Major masonry work such as tiling or cementing is not included.

Please keep ready

• Access to the main water valve

If spare parts are needed, the plumber will source them from the local market.
Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

Options

• Installation or replacement
• Repair
• Blockage removal

What’s included

• Inspection of the floor-mounted western toilet
• Installation, replacement, repair or blockage removal as selected
• Check for leaks and proper flushing
• Clean-up after the job

How it’s done

1. Inspection & quote. The plumber inspects the floor-mounted western toilet and shares a quote for your approval.
2. Service. The selected installation, repair or blockage removal is carried out.
3. Testing. The toilet is flushed to check for proper drainage and no leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• Granite work is not included.
• Major masonry work such as tiling or cementing is not included.

Please keep ready

• Access to the main water valve

If spare parts are needed, the plumber will source them from the local market.
Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

What’s included

• Inspection of the hot and cold water points
• Installation of the shower mixer
• Check for leaks and hot and cold flow
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the hot and cold water points for the mixer.
2. Installation. The water supply is shut off and the shower mixer is fitted with proper sealing.
3. Testing. Hot and cold water flow is checked and the joints are checked for leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• The shower mixer itself is not included.

Please keep ready

• Access to the main water valve
• The shower mixer

The warranty does not cover spare parts supplied by the customer.

Options

• Ceiling-mounted shower
• Wall-mounted shower
• Hand shower

What’s included

• Inspection of the shower point
• Installation of the selected shower
• Check for leaks after installation
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the shower point and the fittings.
2. Installation. The shower is fitted securely with proper sealing.
3. Testing. The water flow is checked and the joints are checked for leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• The shower itself is not included.

Please keep ready

• The shower to be installed

Our professionals do not carry ladders. Please arrange one if the work is at height.
The warranty does not cover spare parts supplied by the customer.

What’s included

• Inspection of the shower point
• Fitting of the shower filter
• Check for leaks after fitting
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the shower point where the filter will be fitted.
2. Installation. The shower filter is fitted between the shower arm and the shower head.
3. Testing. The water flow is checked and the joints are checked for leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• The shower filter itself is not included.

Please keep ready

• The shower filter

The warranty does not cover spare parts supplied by the customer.

What’s included

• Inspection of the shower to find the fault
• Repair of leaks, low flow or clogged outlets
• Sourcing of spare parts from the local market, if needed
• Clean-up after the job

How it’s done

1. Inspection & quote. The plumber inspects the shower and shares a repair quote for your approval.
2. Repair. The fault is repaired, using spare parts from the local market if needed.
3. Testing. The water flow is checked to make sure there are no leaks.
4. Clean-up. The work area is cleaned after the job.

Please keep ready

• Access to the main water valve

Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

What’s included

• Marking of the fixing position
• Drilling and fixing on the wall
• Check that the fitting is firm and level
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the wall and marks the position for the soap holder.
2. Drilling. Holes are drilled and wall plugs are fitted at the marked points.
3. Installation. The soap holder is fixed securely and checked for level.
4. Clean-up. Dust and debris are cleaned after the job.

Not covered

• The soap holder itself is not included.

Please keep ready

• The soap holder to be installed

The warranty does not cover spare parts supplied by the customer.

Options

• Towel rack
• Towel rod
• Small towel holder

What’s included

• Marking of the fixing position
• Drilling and fixing on the wall
• Check that the fitting is firm and level
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the wall and marks the position for the towel holder.
2. Drilling. Holes are drilled and wall plugs are fitted at the marked points.
3. Installation. The towel holder is fixed securely and checked for level.
4. Clean-up. Dust and debris are cleaned after the job.

Not covered

• The towel holder itself is not included.

Please keep ready

• The towel holder to be installed

The warranty does not cover spare parts supplied by the customer.

Options

• Floating glass shelf
• Corner shelf

What’s included

• Marking of the fixing position
• Drilling and fixing on the wall
• Check that the fitting is firm and level
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the wall and marks the position for the shelf.
2. Drilling. Holes are drilled and wall plugs are fitted at the marked points.
3. Installation. The shelf is fixed securely and checked for level.
4. Clean-up. Dust and debris are cleaned after the job.

Not covered

• The shelf itself is not included.

Please keep ready

• The shelf to be installed

The warranty does not cover spare parts supplied by the customer.

Options

• Waste pipe
• Bottle trap

What’s included

• Inspection to find the source of the leak
• Repair or replacement of the waste pipe or bottle trap
• Check for leaks after repair
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the basin and its drain fittings to find the leak.
2. Repair. The faulty waste pipe or bottle trap is repaired or replaced and resealed.
3. Testing. Water is run through the basin to check that there are no leaks.
4. Clean-up. The work area is cleaned after the job.

Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

What’s included

• Inspection of the installation point
• Fixing of the wash basin on the wall or counter
• Connection of the waste pipe and water supply
• Check for leaks and clean-up after the job

How it’s done

1. Inspection. The plumber checks the wall or counter and the water and drain points.
2. Fixing. The basin is fixed securely and levelled.
3. Connection. The waste pipe and tap connections are fitted with proper sealing.
4. Testing & clean-up. Water is run to check for leaks and the work area is cleaned.

Not covered

• The wash basin, tap and fittings are not included.
• Masonry or tiling work is not included.

Please keep ready

• Access to the main water valve
• The wash basin and its fittings

The warranty does not cover spare parts supplied by the customer.

Options

• Basin with bottle trap
• Basin with waste pipe

What’s included

• Removal of the old waste coupling, if any
• Fitting of the new waste coupling
• Connection to the bottle trap or waste pipe
• Check for leaks after fitting

How it’s done

1. Inspection. The plumber checks the basin outlet and the drain connection.
2. Removal. The old waste coupling is removed, if any.
3. Installation. The new coupling is fitted with proper sealing and connected to the drain.
4. Testing & clean-up. Water is run to check for leaks and the work area is cleaned.

Not covered

• The waste coupling itself is not included.

Please keep ready

• The waste coupling

Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

Options

• Bathroom or balcony drain
• Toilet pot
• Kitchen sink
• Wash basin

What’s included

• Inspection of the blocked drain
• Removal of the blockage using suitable tools
• Check that water drains freely
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the drain to find where it is blocked.
2. Blockage removal. The blockage is cleared using suitable plumbing tools.
3. Testing. Water is run through the drain to check that it flows freely.
4. Clean-up. The work area is cleaned after the job.

Not covered

• Blockages in the main building line or sewer are not included.
• Breaking of tiles or masonry is not included.

Please keep ready

• Bucket and water

What’s included

• Inspection of the water inlet point
• Fitting with proper sealing
• Check for leaks after fitting
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the water inlet point and the water supply.
2. Installation. The water supply is shut off and the connection hose is fitted between the inlet and the fixture.
3. Testing. The water supply is turned on and the joints are checked for leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• The connection hose itself is not included.

Please keep ready

• Access to the main water valve
• The connection hose

The warranty does not cover spare parts supplied by the customer.

What’s included

• Inspection of the inlet tap point
• Fitting with proper sealing
• Check for leaks after fitting
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the inlet tap point and the water supply.
2. Installation. The inlet tap or adapter is fitted and the washing machine inlet hose is connected to it.
3. Testing. The water supply is turned on and the joints are checked for leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• Installation of the washing machine itself is not included.

Please keep ready

• Access to the main water valve

The warranty does not cover spare parts supplied by the customer.

What’s included

• Inspection of the water inlet point near the RO
• Fitting with proper sealing
• Check for leaks after fitting
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the water inlet point near the RO and the water supply.
2. Installation. A tap adapter or T-connector is fitted and the water line is connected to the RO inlet.
3. Testing. The water supply is turned on and the joints are checked for leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• Installation or servicing of the RO purifier itself is not included.

Please keep ready

• Access to the main water valve

The warranty does not cover spare parts supplied by the customer.

What’s included

• Inspection of the geyser connections to find the leak
• Repair or replacement of faulty pipes, joints or seals
• Check for leaks after repair
• Clean-up after the job

How it’s done

1. Inspection & quote. The plumber checks the geyser connections and shares a repair quote for your approval.
2. Leak repair. Faulty pipes, joints or seals are fixed or replaced, using parts from the local market if needed.
3. Testing. The water supply is turned on and the connections are checked for leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• Repair of the geyser itself is not included.

Please keep ready

• Access to the main water valve

If you choose not to go ahead after inspection, we'll let you know about any visit fee when you book.
Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

What’s included

• Inspection of the valve to find the leak
• Repair or replacement of the valve or its seals
• Check for leaks after repair
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the shut-off valve to find the source of the leak.
2. Repair. The main supply is shut off and the valve seals are repaired or the valve is replaced.
3. Testing. The water supply is turned on and the valve is checked for leaks.
4. Clean-up. The work area is cleaned after the job.

Please keep ready

• Access to the main water valve

Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

What’s included

• Visit by a plumber to understand your requirement
• Inspection of the problem before work
• Completion of the agreed work
• Clean-up after the job

How it’s done

1. Inspection & quote. The plumber checks the requirement on site and shares a quote for your approval.
2. Service. The agreed work is carried out once you approve the quote.
3. Testing. The work is checked to make sure there are no leaks.
4. Clean-up. The work area is cleaned after the job.

Please keep ready

• Access to the main water valve

If you choose not to go ahead after inspection, we'll let you know about any visit fee when you book.
Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

Options

• Up to 500 litres
• 500–2,000 litres

What’s included

• Inspection of the tank location and pipelines
• Placing of the tank on the stand or base
• Connection of inlet, outlet and overflow pipes
• Check for leaks after installation

How it’s done

1. Inspection. The plumber checks the tank location, base and existing pipelines.
2. Placement. The tank is placed securely on the stand or base.
3. Connection. The inlet, outlet and overflow pipes are connected to the tank.
4. Testing & clean-up. The tank is filled to check for leaks and the work area is cleaned.

Not covered

• The water tank itself is not included.
• Building or repair of the tank stand or base is not included.

Please keep ready

• The water tank
• Clear access to the terrace or tank area

Our professionals do not carry ladders. Please arrange one if the work is at height.
Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

Options

• Overflow problem
• Tank lid replacement
• Connection leakage

What’s included

• Inspection of the tank to find the problem
• Repair of the overflow, lid or connection as selected
• Check for leaks after repair
• Clean-up after the job

How it’s done

1. Inspection & quote. The plumber inspects the tank and shares a repair quote for your approval.
2. Repair. The overflow valve, lid or leaking connection is repaired or replaced.
3. Testing. The tank is filled to check that it works properly without leaks.
4. Clean-up. The work area is cleaned after the job.

Not covered

• Tank cleaning is not included.

Please keep ready

• Clear access to the terrace or tank area

Our professionals do not carry ladders. Please arrange one if the work is at height.
Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

What’s included

• Inspection of the motor location and pipelines
• Fixing of the motor at the location
• Connection of the suction and delivery pipes
• Test run after installation

How it’s done

1. Inspection. The plumber checks the motor location, pipelines and power point.
2. Fixing. The motor is placed and fixed securely at the location.
3. Connection. The suction and delivery pipes are connected to the motor.
4. Test run. The motor is run to check water flow and that there are no leaks.

Not covered

• The motor itself is not included.
• Electrical wiring for the motor is not included.

Please keep ready

• The water pump motor
• A power point near the motor

Spare parts, if needed, are quoted separately.
The warranty does not cover spare parts supplied by the customer.

What’s included

• Inspection of the motor for trapped air
• Release of trapped air from the motor and pipes
• Test run to check water flow
• Clean-up after the job

How it’s done

1. Inspection. The plumber checks the motor for trapped air affecting water flow or pressure.
2. Air removal. Trapped air is released from the motor and pipes to restore normal flow.
3. Test run. The motor is run to check that water flows properly.
4. Clean-up. The work area is cleaned after the job.

Not covered

• Repair of the motor itself is not included.

Please keep ready

• A power point near the motor

The warranty does not cover spare parts supplied by the customer.